Support community for TTG plugins and products.
NOTICE
The Turning Gate's Community has moved to a new home, at https://discourse.theturninggate.net.
This forum is now closed, and exists here as a read-only archive.
You are not logged in.
Pages: 1
What am I doing wrong, here?
I delete or remove all the files in the backlight folder except for /backlight/data and /backlight/custom. Make sure to leave any gallery folders untouched. Anyway, there are no gallery folders in the backlight folder;
I upload via ftp all the files (.htaccess, index.php and the env.php.skel ) but not the custom or data folders from the backlight 2 installation folder into the backlight folder;
I access the installer, at https://nathaliemoliavko-visotzky.com/e … installer/;
I am asked to supply my Backlight 2 order number and email address;
I then press “Log into Installer” and press “Install Backlight 2”;
I am then informed that “Backlight 2 was installed successfully” I then, press “Continue to Backlight”;
I then try to log in with username admin, password ttg8888 and fail...but, this is an upgrade so I use the user/password combo already in use. Ok;
I then visit each of the Admin, Publisher and Designer menu items to upgrade the databases;
I go to Admin ⇒ Backlight Modules to install or update any add-ons that I have purchased and I also add the Okapi modules this being an upgrade;
I then visit the Backlight landing page and click on Update Album Files;
I do not install the latest Publisher plug-in because I already have one installed from previous installations.
And yet, I get an error message when accessing the albums:
Something went wrong
Unable to find the module module-theater.Have you removed this from backlight/designer/modules? If so, either copy the module back, or change the template used by this album. in EngineFactory.php on line 404
Also, the BIO and Contact+CV pages display an HTTP500 error
Offline
UPDATE:
I changed the index.php files in the Fr and En sides and the BIO and CONTACT+CV pages now display, although not in https mode (not secure) like the rest of the site.
All that's left is that pesky problem with the albums...
Offline
The error implies that you haven’t installed the Backlight 2 version of Theater
Rod
Just a user with way too much time on his hands.
www.rodbarbee.com
ttg-tips.com, Backlight 2/3 test site
Offline
But that's the problem: I did!
From the Backlight Admin page:
Backlight 2 Add-on: Theater pangolin-theater 2.0.2
It's there, I just did the upgrade and yet it doesn't show up.
Offline
Did you create a new Theater template and assign it to any albums that were using the old version?
Rod
Just a user with way too much time on his hands.
www.rodbarbee.com
ttg-tips.com, Backlight 2/3 test site
Offline
This is how the site looks in ftp:
and in Backlight:
Offline
Did you create a new Theater template and assign it to any albums that were using the old version?
Maybe I'm not too clear as to how to assign the module?
In Backlight>Publisher>Galerie>Assign Templates, I notice that the choices I have are Galerie or Standard-Album templates.
How do I assign the videos to the theatre-module?
Last edited by pideja (2019-08-09 22:20:57)
Offline
I don’t see a Pangolin Theater album template
What often happens is that you had BL 1 albums using a Theater template.
When updating to BL2, the old BL 1 Theater module is gone and therefore you get the error that module-theater cannot be found.
If that’s what you had, you need to create a new Pangolin Theater template and assign it to the albums that were using the BL 1 Theater template
Rod
Just a user with way too much time on his hands.
www.rodbarbee.com
ttg-tips.com, Backlight 2/3 test site
Offline
Did you create a new Theater template and assign it to any albums that were using the old version?
Maybe I'm not too clear as to how to assign the module?
In Backlight>Publisher>Galerie>Assign Templates, I notice that the choices I have are Galerie or Standard-Album templates.
How do I assign the videos to the theatre-module?
You need to first create a new Pangolin Theater album template
http://backlight.theturninggate.net/doc … -on_basics
Rod
Just a user with way too much time on his hands.
www.rodbarbee.com
ttg-tips.com, Backlight 2/3 test site
Offline
Beginning to see the light...after creating Pangolin templates for the Pages and the theatre modules, I succeded in assigning the albums to these new templates (what took me so long?).
Formatting is a bit different than in the previous Okapi version but it's getting there.
Once I designed the Fr side, I exported the templates to the En side. Should be identical, right? Alas, no. The title and the breadcrumbs are ok in the Fr side but aligned very differently in the En side.
Checked templates and CSS but I still can't find how to design these elements as I want them.
It will come in time, I suppose.
Thanks to Ben, Rod and Daniel.
Last edited by pideja (2019-08-10 00:20:10)
Offline
Once I designed the Fr side, I exported the templates to the En side. Should be identical, right? Alas, no. The title and the breadcrumbs are ok in the Fr side but aligned very differently in the En side.
Could be something to do with page templates. When exporting the album template did you include the page template?
Rod
Just a user with way too much time on his hands.
www.rodbarbee.com
ttg-tips.com, Backlight 2/3 test site
Offline
That did it: I exported the "correct" page template and it's related CSS to the fr side and voilà! Both sides are now identical.
One other thing eludes me. I'm trying to get breadcrumbs leading back to the gallery page. As yet, I have the album title as a breadcrumb but not where it comes from, the gallery.
Could it be because the theatre page is Pangolin and all the others are Okapi?
This would mean I'd have to create a Pangolin page for every Okapi page? And since it is not possible to import Okapi templates into Pangolin pages, that could mean a complete redesign.
Just when I thought this upgrade to Pangolin was easy and straightforward.
Last edited by pideja (2019-08-11 00:47:45)
Offline
One other thing eludes me. I'm trying to get breadcrumbs leading back to the gallery page. As yet, I have the album title as a breadcrumb but not where it comes from, the gallery.
Edit the top level gallery. There's an option for breadcrumbs
In Backlight, go to Publisher > click on name of top-level gallery > click on Edit Properties
Rod
Just a user with way too much time on his hands.
www.rodbarbee.com
ttg-tips.com, Backlight 2/3 test site
Offline
OK thanks Rod
Offline
Pages: 1