Community @ The Turning Gate

Support community for TTG plugins and products.

You are not logged in.

#1 2016-05-28 03:26:39

gary_in_austin
Member
From: Austin, TX
Registered: 2015-02-11
Posts: 77

photoswipe not working_forward/back arrows gone

http://www.graphicresolutions.com/GaryB … galleries/

Under Album settings -> Large Image Presentation -> Presentation Type
I have chosen Photoswipe but on tablets and phones; there is no photoswipe ability, -it just displays a single image.
On desktop computers the forward and back arrows are not showing up.

I've cleared the Backlight Template Cache and my browser's cache.
..any suggestions?

Last edited by gary_in_austin (2016-05-28 03:27:02)

Offline

#2 2016-05-28 03:28:51

rod barbee
Moderator
From: Port Ludlow, WA USA
Registered: 2012-09-24
Posts: 17,184
Website

Re: photoswipe not working_forward/back arrows gone

check the template that the album is using. Even on the desktop I'm seeing the single image presentation.


Rod 
Just a user with way too much time on his hands.
www.rodbarbee.com
ttg-tips.com, Backlight 2 test site, Pangolin test site

Offline

#3 2016-05-28 03:54:33

gary_in_austin
Member
From: Austin, TX
Registered: 2015-02-11
Posts: 77

Re: photoswipe not working_forward/back arrows gone

I'm using my correct template. I tried going under Design Template and choosing the "Backlight Standard Page" but that wasn't it. Also tried, going back to the default .css and that was not the issue, either.

Do you think I need to reinstall some part of Backlight on my server, or maybe it's a permissions issue?

Offline

#4 2016-05-28 06:25:44

gary_in_austin
Member
From: Austin, TX
Registered: 2015-02-11
Posts: 77

Re: photoswipe not working_forward/back arrows gone

Ah Ha! You were correct, Rod!

By going to Publisher -> Top-level Galleries and then to Albums, I had a mix of my custom templates and the standard templates.
And going into Designer ->Templates I had chosen Standard Template on one of them instead of my custom one (for ALL of them). Once I choose these correctly, I'm sure everything will be great again. Thanks so much, Rod.

Last edited by gary_in_austin (2016-05-28 06:34:24)

Offline

#5 2016-06-09 02:18:34

DomB
Member
From: CH
Registered: 2016-05-05
Posts: 59
Website

Re: photoswipe not working_forward/back arrows gone

Hi,

I installed 102 and I find myself with HTML Single-images. I can put photoswipe or single image on the button-type presentation, it does not display. In lightroom it is the right gallery and also featured in Publisher / top-level galleries / galleries / Assign template
Where I'm lost? :-)
http://www.dbersier.com/test/galleries/


Je ne perds jamais: soit je gagne, soit j’apprends (N. Mandela)

Offline

#6 2016-06-09 02:29:36

rod barbee
Moderator
From: Port Ludlow, WA USA
Registered: 2012-09-24
Posts: 17,184
Website

Re: photoswipe not working_forward/back arrows gone

when you updated did you complete the update process by signing in and visiting the Publisher and Design pages as well as clearing template cache?
did you update the Lightroom Publisher plug-in?
http://backlight.theturninggate.net/doc … _changelog


Rod 
Just a user with way too much time on his hands.
www.rodbarbee.com
ttg-tips.com, Backlight 2 test site, Pangolin test site

Offline

#7 2016-06-09 02:59:59

DomB
Member
From: CH
Registered: 2016-05-05
Posts: 59
Website

Re: photoswipe not working_forward/back arrows gone

Oh it's possible i have no correctly do that. I try again the processus ?


Je ne perds jamais: soit je gagne, soit j’apprends (N. Mandela)

Offline

#8 2016-06-09 04:22:02

tomowensphoto
Member
From: Suffolk
Registered: 2012-11-21
Posts: 259
Website

Re: photoswipe not working_forward/back arrows gone

I have the same problem. All single images now. Got several prompts to update in Admin which I allowed as per readme.txt. Interstly, when Photoswipe is showing in the combo, both Photoswipe and HTML single option areas are on display but if Single image pages is selected only the HTML single image options are available to set parameters against.


Regards,
TomO
Just a simple photographer
Live site at http://tomowens.openpoint.co.uk/

Offline

#9 2016-06-09 05:08:35

rod barbee
Moderator
From: Port Ludlow, WA USA
Registered: 2012-09-24
Posts: 17,184
Website

Re: photoswipe not working_forward/back arrows gone

Interstly, when Photoswipe is showing in the combo, both Photoswipe and HTML single option areas are on display but if Single image pages is selected only the HTML single image options are available to set parameters against.

This is normal. Download and share options are not available for Single HTML presentation.

I believe the single page options are shown along with the Photoswipe controls because Single Page HTML presentation is use when an image is accessed from its permalink.


Rod 
Just a user with way too much time on his hands.
www.rodbarbee.com
ttg-tips.com, Backlight 2 test site, Pangolin test site

Offline

#10 2016-06-09 05:22:06

tomowensphoto
Member
From: Suffolk
Registered: 2012-11-21
Posts: 259
Website

Re: photoswipe not working_forward/back arrows gone

I am wondering what else to check. Photoswipe was working OK before the upgrade but not now. Cleared the cache multiple times, have verified that the right Publisher plugin is being accessed.
Regards,
TomO


Regards,
TomO
Just a simple photographer
Live site at http://tomowens.openpoint.co.uk/

Offline

#11 2016-06-09 05:42:04

rod barbee
Moderator
From: Port Ludlow, WA USA
Registered: 2012-09-24
Posts: 17,184
Website

Re: photoswipe not working_forward/back arrows gone

have you tried creating a new album template and applying it to the album?


Rod 
Just a user with way too much time on his hands.
www.rodbarbee.com
ttg-tips.com, Backlight 2 test site, Pangolin test site

Offline

#12 2016-06-09 05:56:40

tomowensphoto
Member
From: Suffolk
Registered: 2012-11-21
Posts: 259
Website

Re: photoswipe not working_forward/back arrows gone

Just tried that Rod. Makes no difference. The Album Sets display OK . It is just the Albums not displaying in Photoswipe mode.
I created a template 102 Album, made no changes other than check that Photoswipe was still the default option for Large Image Presentation. I have republished the Album several times as well as clearing the cache.
Regards,
TomO

Last edited by tomowensphoto (2016-06-09 06:00:53)


Regards,
TomO
Just a simple photographer
Live site at http://tomowens.openpoint.co.uk/

Offline

#13 2016-06-09 06:19:30

Ben
Moderator
From: Melbourne, Australia
Registered: 2012-09-29
Posts: 4,231

Re: photoswipe not working_forward/back arrows gone

Hi Tom, I've been able to fix your template by appending ?reloadModel&skipCache to the end of an album URL.

What this does is reloads the settings structure for the web engine (e.g. Standard Album), picking up elements that have changed.  In this case, 1.0.2 added a scaffolding JS file that hadn't been coming through.

This undocumented step should not have been necessary.  The change of version from 1.0.1 to 1.0.2 should have triggered the reload.

Offline

#14 2016-06-09 12:35:54

bcobb10b
Member
From: Sandy Springs GA
Registered: 2014-03-28
Posts: 61

Re: photoswipe not working_forward/back arrows gone

Ben wrote:

Hi Tom, I've been able to fix your template by appending ?reloadModel&skipCache to the end of an album URL.

What this does is reloads the settings structure for the web engine (e.g. Standard Album), picking up elements that have changed.  In this case, 1.0.2 added a scaffolding JS file that hadn't been coming through.

This undocumented step should not have been necessary.  The change of version from 1.0.1 to 1.0.2 should have triggered the reload.

I was having the same issue as TomO.  Ben's suggestion fixed it.  thank you Ben!!

- Bill Cobb

Offline

#15 2016-06-09 14:09:53

tomowensphoto
Member
From: Suffolk
Registered: 2012-11-21
Posts: 259
Website

Re: photoswipe not working_forward/back arrows gone

Many thanks for sorting this out Ben. All looking fine now.
Regards,
TomO


Regards,
TomO
Just a simple photographer
Live site at http://tomowens.openpoint.co.uk/

Offline

#16 2016-06-09 20:43:00

markh
Member
From: Center of The US
Registered: 2012-09-24
Posts: 380
Website

Re: photoswipe not working_forward/back arrows gone

Confused. Photoswipe is gone. But where exactly am I supposed to append: ?reloadModel&skipCache to the end of an album URL?
Markh

Offline

#17 2016-06-09 20:52:26

Ben
Moderator
From: Melbourne, Australia
Registered: 2012-09-29
Posts: 4,231

Re: photoswipe not working_forward/back arrows gone

Hi Mark,  after any Backlight album.  So if you had an album at http://yoursite.com/galleries/my-gallery/, the URL would be http://yoursite.com/galleries/my-galler … &skipCache

Offline

#18 2016-06-09 20:56:35

markh
Member
From: Center of The US
Registered: 2012-09-24
Posts: 380
Website

Re: photoswipe not working_forward/back arrows gone

Um... OK. But menus in backlight don't go to individual albums, so I add this to the name of the directory listing in CPanel?

Offline

#19 2016-06-09 20:59:47

Ben
Moderator
From: Melbourne, Australia
Registered: 2012-09-29
Posts: 4,231

Re: photoswipe not working_forward/back arrows gone

Hi Mark, navigate to a gallery.  Whether that's via a menu structure or typing the URL into the browser doesn't matter.  Then append ?reloadModel&skipCache to whatever URL you have in your address bar.

Offline

Board footer

Powered by FluxBB